Cup Holder
2014-2021 Bmw I3
Description
**Updated New design that has a height more equivalent to the OEM cup holder. It is also quite a bit less material (Almost an hour less printing for me). I also changed how the bottom and top interlock. It is meant to be tapped for 8-32 screws now. There is also a tab that is meant to be glued for more strength as well. (I still need to buy these screws so its not fully tested yet, but I'm confident it is a better design. Printed with 3 perimeters and an infill of 20% for the bottom and 25% for the top.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
**Updated New design that has a height more equivalent to the OEM cup holder. It is also quite a bit less material (Almost an hour less printing for me). I also changed how the bottom and top interlock. It is meant to be tapped for 8-32 screws now. There is also a tab that is meant to be glued for more strength as well. (I still need to buy these screws so its not fully tested yet, but I'm confident it is a better design. Printed with 3 perimeters and an infill of 20% for the bottom and 25% for the top.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed