Console Coin Holder
2015-2017 Ford Mustang
May 4, 2026
Use the built-in measurement tool to verify fit before downloading or ordering.
Description
This coin holder will fit between the cup holders in a 2015-2017 (and probably 2018) Mustang. The STL is provided as a solid so that you can pick your wall thickness. To print: - set infill to zero - set top layers to zero - set the number of bottom layers, I made mine 2mm - set the number of perimeters, I used 4 0.4mm perimeters for a 1.6mm wall
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Loading pricing...
Use the built-in measurement tool to verify fit before downloading or ordering.
Part Description
This coin holder will fit between the cup holders in a 2015-2017 (and probably 2018) Mustang. The STL is provided as a solid so that you can pick your wall thickness. To print: - set infill to zero - set top layers to zero - set the number of bottom layers, I made mine 2mm - set the number of perimeters, I used 4 0.4mm perimeters for a 1.6mm wall
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed