Tail Light Assembly Clip
2015 Jeep Patriot
Description
The rear tail light assembly on the Jeep Patriot (2015 in my case) is held in place by plastic clips / rivets that are near impossible to remove without breaking when you need to change a bulb... and most automotive parts places just want you to spend a couple hundred on a whole new assembly. This clip, and a single #8 1inch wood screw replaces it perfectly. This is version 3 as I tried different shapes/spaces for tolerances.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
The rear tail light assembly on the Jeep Patriot (2015 in my case) is held in place by plastic clips / rivets that are near impossible to remove without breaking when you need to change a bulb... and most automotive parts places just want you to spend a couple hundred on a whole new assembly. This clip, and a single #8 1inch wood screw replaces it perfectly. This is version 3 as I tried different shapes/spaces for tolerances.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed