Antenna Wrench
2015 Toyota Tacoma
Description
This is a custom wrench I designed for my 2015 Tacoma antenna, may work on other make's/models. I take the antenna off every time I use the car wash and I wanted a plastic wrench that won't scratch the paint. The distance between flats is 8.05mm. This is a 0.1mm air gap around the antenna nut which works perfectly for my printer. if you need more air gap for your printer, scale accordingly. For example, scale by 1.025 to achieve a 0.2mm gap.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
This is a custom wrench I designed for my 2015 Tacoma antenna, may work on other make's/models. I take the antenna off every time I use the car wash and I wanted a plastic wrench that won't scratch the paint. The distance between flats is 8.05mm. This is a 0.1mm air gap around the antenna nut which works perfectly for my printer. if you need more air gap for your printer, scale accordingly. For example, scale by 1.025 to achieve a 0.2mm gap.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed