Usb Adapter Dash Blank Insert
2015 Toyota Tundra
Description
This part replaces either the factory USB plug, or an empty port in Toyotas, and allows the cord that comes with Sony radios to snap into place without glue. It fits extremely well, and can be printed without support if laid on the face of the plug, assuming your printer is well tuned. I made this for a 2015 Tundra, but Toyota uses this port on many of their models. I recommend PETG so it will survive the heat of a vehicle, and to allow the clips to bend and snap into place without breaking.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
This part replaces either the factory USB plug, or an empty port in Toyotas, and allows the cord that comes with Sony radios to snap into place without glue. It fits extremely well, and can be printed without support if laid on the face of the plug, assuming your printer is well tuned. I made this for a 2015 Tundra, but Toyota uses this port on many of their models. I recommend PETG so it will survive the heat of a vehicle, and to allow the clips to bend and snap into place without breaking.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed