Door Cup Holder
2015 Volkswagen Jetta
Description
This is a closed bottom cup holder that attaches to the door compartment. I designed it to hold To-Go coffee cups, with a slight interior taper to snug up the medium to large sizes. Since I printed mine with ASA filament, I added supports in cad to keep the slot section from distorting/warping. These are easily cut, filed away. I printed min with the open end of the cup on the bed. In orca slicer, I used slim tree support withe threshold angle set to 15, so only the bottom of the cup got supported. I didn't need a brim.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
This is a closed bottom cup holder that attaches to the door compartment. I designed it to hold To-Go coffee cups, with a slight interior taper to snug up the medium to large sizes. Since I printed mine with ASA filament, I added supports in cad to keep the slot section from distorting/warping. These are easily cut, filed away. I printed min with the open end of the cup on the bed. In orca slicer, I used slim tree support withe threshold angle set to 15, so only the bottom of the cup got supported. I didn't need a brim.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed