Armrest Tray Inlay
2015 Toyota Auris (1.2 Turbo)
Description
This is an inlay for the upper tray of the Toyota Auris armrest. (esp. Toyota Auris 1.2 Turbo produced since 06/2015) I was unhappy with the hard inlay of the tray because small parts, i.e. coins, used to slide around with a scratchy sound while driving the car. So I designed an inlay that should be printed with TPU to suppress that scratchy sound. Additionally I added a separator to keep pieces in front or back. 2019.03.13: Added 3 models with more/different slots.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
This is an inlay for the upper tray of the Toyota Auris armrest. (esp. Toyota Auris 1.2 Turbo produced since 06/2015) I was unhappy with the hard inlay of the tray because small parts, i.e. coins, used to slide around with a scratchy sound while driving the car. So I designed an inlay that should be printed with TPU to suppress that scratchy sound. Additionally I added a separator to keep pieces in front or back. 2019.03.13: Added 3 models with more/different slots.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed