Tpms Module Holder Bracket
2016 Audi A4 B9
Description
This is a support bracket for the Audi TPMS module, 8S0 907 273. Suitable for Audi A4/S4/RS4 B9 models, and may well fit A5/S5/RS5 as well. This holds the module securly by the rear right wheel. The OEM fitting location is under the car, but this works just as well, and is neater and easier, whilst protecting the module and wiring. Printing: Prusa Mini+ Supports = Yes Infill = 30% Setting = 0.20mm Quality Material = PETG Additional = 2 small self tapping screws to hold module onto the bracket.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
This is a support bracket for the Audi TPMS module, 8S0 907 273. Suitable for Audi A4/S4/RS4 B9 models, and may well fit A5/S5/RS5 as well. This holds the module securly by the rear right wheel. The OEM fitting location is under the car, but this works just as well, and is neater and easier, whilst protecting the module and wiring. Printing: Prusa Mini+ Supports = Yes Infill = 30% Setting = 0.20mm Quality Material = PETG Additional = 2 small self tapping screws to hold module onto the bracket.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed