Led Headlight Dust Cover
2016 Kia Soul Ev
Description
I was converting my 2016 Soul EV to have LED headlights. The current dust caps do not allow for the longer bulb with the fan on the end. There is another dome shaped cover on thingiverse, but when I printed it, it was oval, not round and the tabs were different lengths. I printed this in pla, and painted it afterwards. I printed it with tabs down, and used basic supports for the hollow center. I uploaded 2 sizes. I designed the longer one first. It fits the passenger side perfect. But there is something in the way on the drivers side, so I designed a shorter version that is 1cm shorter. The shorter version would work on both sides, but I liked using the larger for the passenger side for more airspace.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
I was converting my 2016 Soul EV to have LED headlights. The current dust caps do not allow for the longer bulb with the fan on the end. There is another dome shaped cover on thingiverse, but when I printed it, it was oval, not round and the tabs were different lengths. I printed this in pla, and painted it afterwards. I printed it with tabs down, and used basic supports for the hollow center. I uploaded 2 sizes. I designed the longer one first. It fits the passenger side perfect. But there is something in the way on the drivers side, so I designed a shorter version that is 1cm shorter. The shorter version would work on both sides, but I liked using the larger for the passenger side for more airspace.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed