Door Speaker Adapter Bracket
2016 Mazda Mx5 Miata ND
Description
Adapter bracket for replacing the 6.5" door speakers in an ND generation Mazda MX5. Fits the factory door mounting holes and hardware, should be compatible with many aftermarket 6.5" speakers. I used JBL GTO620's as replacements. Speakers were mounted to the brackets using M4x20 hex cap machine screws and nuts, there are pockets in the bracket so the heads of the screws do not protrude and interfere with mounting. I also used foam between the bracket and door, and speaker and bracket, to minimize any coupled vibration. Printed with PLA, 30% infill. It is plenty rigid.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
Adapter bracket for replacing the 6.5" door speakers in an ND generation Mazda MX5. Fits the factory door mounting holes and hardware, should be compatible with many aftermarket 6.5" speakers. I used JBL GTO620's as replacements. Speakers were mounted to the brackets using M4x20 hex cap machine screws and nuts, there are pockets in the bracket so the heads of the screws do not protrude and interfere with mounting. I also used foam between the bracket and door, and speaker and bracket, to minimize any coupled vibration. Printed with PLA, 30% infill. It is plenty rigid.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed