Fuel Cap Holder
2016 Toyota Tacoma 3rd Gen
Description
Designed for a 2016 Tacoma. Comments state it will not fit a 2021, please verify your fitment 1st. Tacoma 3rd Gens do not have a fuel cap storage holder while in the process of fueling...I know right! This simple print provides a solution for that. Application 1) Print 2) Add a small section of double sided automotive grade tape to back 3) Add a bit of isopropyl alcohol to the back of the tape which will adhere to the fuel door (this will allow the holder to slide a tad) 4) Insert holder to the far right and then locate to the left
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
Designed for a 2016 Tacoma. Comments state it will not fit a 2021, please verify your fitment 1st. Tacoma 3rd Gens do not have a fuel cap storage holder while in the process of fueling...I know right! This simple print provides a solution for that. Application 1) Print 2) Add a small section of double sided automotive grade tape to back 3) Add a bit of isopropyl alcohol to the back of the tape which will adhere to the fuel door (this will allow the holder to slide a tad) 4) Insert holder to the far right and then locate to the left
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed