Rear Seat Monitor Headrest Mounts
2017 Ford Focus (ST)
Description
Bit of a random one, created for own use, but thought I would upload it anyway. The brackets that came with our Lenco DVP-939 were really unsuited to our car, so I created something custom to fit. The main parts are ABS in my case, the pad is printed in TPE to try and cause some flexibilty and friction to the TVs. Needs 8x M5 Cap heads, and a 100mm long bit of M6 threaded rod with 2 nuts.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
Bit of a random one, created for own use, but thought I would upload it anyway. The brackets that came with our Lenco DVP-939 were really unsuited to our car, so I created something custom to fit. The main parts are ABS in my case, the pad is printed in TPE to try and cause some flexibilty and friction to the TVs. Needs 8x M5 Cap heads, and a 100mm long bit of M6 threaded rod with 2 nuts.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed