Ignition Cover
2018 Chevrolet Colorado
Description
This will cover the gap between the ignition and the steering wheel housing cover. I got tired of putting my key between the ignition and cover, so I made this to go between the two. It snaps into place but be sure not to press too hard that you could break anything. This fits a 2018 Chevy Colorado. Fits a ~29mm diameter ignition with a ~33mm hole. *** 05/25/2020 *** Version 2 Made the interlocking diameter 0.5mm wider to better account for minor steering column variances in vehicles. I recommend trying version 1 first, if the key ring comes loose, try version 2. Added a slight radius to the interlocking ring to allow smoother insertion.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
This will cover the gap between the ignition and the steering wheel housing cover. I got tired of putting my key between the ignition and cover, so I made this to go between the two. It snaps into place but be sure not to press too hard that you could break anything. This fits a 2018 Chevy Colorado. Fits a ~29mm diameter ignition with a ~33mm hole. *** 05/25/2020 *** Version 2 Made the interlocking diameter 0.5mm wider to better account for minor steering column variances in vehicles. I recommend trying version 1 first, if the key ring comes loose, try version 2. Added a slight radius to the interlocking ring to allow smoother insertion.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed