Shifter Knob
2018 Ford Mustang (4 Cyl EcoBoost Turbo)
Description
I decided I wanted a custom shifter for my Mustang so I made this one in Fusion 360. After several attempts and designs I finalized on this one. I like the way it feels better than the stock shifter. NOTE: I had a difficult time in finding what the proper thread pitch was on this shifter. Every site I went to including Mustang sites all say the threads are 12mm x 1.75 thread pitch. However from what I can deduce this is ONLY for the higher end models like the GT. I had to buy a thread pitch gauge to properly identify that the 4 Cyl Eco boost with Turbo is indeed a 12mm x 1.25 thread pitch. If you want to use this in a GT you might have to use a different sized lugnut or other solution. I have not tested this on any other model but mine. And quite frankly the 4 CYL turbo has 330 horses so MORE than enough for me.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
I decided I wanted a custom shifter for my Mustang so I made this one in Fusion 360. After several attempts and designs I finalized on this one. I like the way it feels better than the stock shifter. NOTE: I had a difficult time in finding what the proper thread pitch was on this shifter. Every site I went to including Mustang sites all say the threads are 12mm x 1.75 thread pitch. However from what I can deduce this is ONLY for the higher end models like the GT. I had to buy a thread pitch gauge to properly identify that the 4 Cyl Eco boost with Turbo is indeed a 12mm x 1.25 thread pitch. If you want to use this in a GT you might have to use a different sized lugnut or other solution. I have not tested this on any other model but mine. And quite frankly the 4 CYL turbo has 330 horses so MORE than enough for me.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed