Rear Speaker Bracket
2018 Kia Picanto JA (GT)
Description
This is a speaker bracket to allow larger 6.5" speakers to be mounted to the rear doors of a 2018+ Kia Picanto. It was designed for a Picanto GT, but should fit other variants. The bracket has 4 holes for speaker mounting, a tab to fit the connector clip, and three holes for mounting to the door. The original bracket is riveted to the door, so a fair bit of work is required to drill them out and then install rivnuts/nutserts to mount the new bracket. I used M3 rivnuts as they fit the holes without drilling into the door. M3 is strong enough to support the speaker.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
This is a speaker bracket to allow larger 6.5" speakers to be mounted to the rear doors of a 2018+ Kia Picanto. It was designed for a Picanto GT, but should fit other variants. The bracket has 4 holes for speaker mounting, a tab to fit the connector clip, and three holes for mounting to the door. The original bracket is riveted to the door, so a fair bit of work is required to drill them out and then install rivnuts/nutserts to mount the new bracket. I used M3 rivnuts as they fit the holes without drilling into the door. M3 is strong enough to support the speaker.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed