Backup Camera Roof Cover
2018 Subaru Outback
Description
Backup Camera Roof 5.0 Test Vehicle: 2018 Subaru Outback Total redesign on the backup camera roof. I widened the "awning" to minimize the tunnel vision/visual blocking of the camera. I also raised it a bit around the lip. It'll stick out a little more, but hopefully it'll still be effective. This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/2OInCUoGIeF
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
Backup Camera Roof 5.0 Test Vehicle: 2018 Subaru Outback Total redesign on the backup camera roof. I widened the "awning" to minimize the tunnel vision/visual blocking of the camera. I also raised it a bit around the lip. It'll stick out a little more, but hopefully it'll still be effective. This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/2OInCUoGIeF
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed