Headrest Bag Hook
2019 Acura Rdx 3rd Gen
Description
This is a remix of Car Headrest Bag Hook - https://www.thingiverse.com/thing:5519951 by Jsreb. This headrest bag hook was designed for a 2019 Acura RDX and will work with any car with headrest posts 150mm apart and 14mm in diameter. Confirmed to work with all 3rd gen RDXs (2019-Present) Somethings I changed were adding two arms, increased the hook height and rounding the sides. I'm not sure where it was warping on the original design but I was thinking it might be where it clips on the headrest. So I made it so you have to slide it on. I also made the hooks stronger by making them sperate. Allowing them to be printed horizontal. You will need to glue the hooks onto the bracket. I used JBL plastic bonder but you can use whatever you like. Having two hooks will allow you to use both loops of a bag on both arms of the hook. It is capable of holding a bag with just one hook. To install you will need to pull the headrest all the way out. Slide it on and put the headrest back on.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
This is a remix of Car Headrest Bag Hook - https://www.thingiverse.com/thing:5519951 by Jsreb. This headrest bag hook was designed for a 2019 Acura RDX and will work with any car with headrest posts 150mm apart and 14mm in diameter. Confirmed to work with all 3rd gen RDXs (2019-Present) Somethings I changed were adding two arms, increased the hook height and rounding the sides. I'm not sure where it was warping on the original design but I was thinking it might be where it clips on the headrest. So I made it so you have to slide it on. I also made the hooks stronger by making them sperate. Allowing them to be printed horizontal. You will need to glue the hooks onto the bracket. I used JBL plastic bonder but you can use whatever you like. Having two hooks will allow you to use both loops of a bag on both arms of the hook. It is capable of holding a bag with just one hook. To install you will need to pull the headrest all the way out. Slide it on and put the headrest back on.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed