Tailgate Bushing
2019 Chevrolet Silverado 1500
Description
This is a Chevrolet Silverado tailgate bushing, a very little part that works hard and needs to be replaced almost every year. This bushing fits my 2019 Chevrolet Silverado 1500 with the new body style. This part needs to be as strong as possible. I print it using PETG with 100% infill, but if you have a carbon reinforced filament that will be best. It's easy to replace: 1. Open your tailgate; 2. Pull on the right side of the tailgate when the bushing is aligned with the spring opening; 3. Remove the broken bushing and replace it with the printed one. It costs less than 25¢ to print, so print a few and leave them in your truck. Happy printing.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
This is a Chevrolet Silverado tailgate bushing, a very little part that works hard and needs to be replaced almost every year. This bushing fits my 2019 Chevrolet Silverado 1500 with the new body style. This part needs to be as strong as possible. I print it using PETG with 100% infill, but if you have a carbon reinforced filament that will be best. It's easy to replace: 1. Open your tailgate; 2. Pull on the right side of the tailgate when the bushing is aligned with the spring opening; 3. Remove the broken bushing and replace it with the printed one. It costs less than 25¢ to print, so print a few and leave them in your truck. Happy printing.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed