Boost Gauge Vent Mount
2019-2022 Ford Ranger
Description
Created for the NEED of a real Boost Gauge in the 2019-2022 Ford Ranger. Fits in the drivers side window Air Vent. Version 3.0 (This version is angled towards the driver and 4 degrees down for the perfect angle: As seen on ranger5g.com 52mm gauge fitment Factory OEM LOOK Prints on most printers (90mm x 60mm) Secure fit of your boost gauge retained air flow management (vent still works) Radiused vents for good air flow and visual look Vent comes apart very nicely with several tabs. However the inside of the vent will need to be opened up for a 52mm gauge to seat flush. (I used a 2" hole saw in reverse) I just ran the drill inside the mount I printed as a guide. Very little needs to be removed. Modify as you need, please give me credit for the original design. Thank You
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
Created for the NEED of a real Boost Gauge in the 2019-2022 Ford Ranger. Fits in the drivers side window Air Vent. Version 3.0 (This version is angled towards the driver and 4 degrees down for the perfect angle: As seen on ranger5g.com 52mm gauge fitment Factory OEM LOOK Prints on most printers (90mm x 60mm) Secure fit of your boost gauge retained air flow management (vent still works) Radiused vents for good air flow and visual look Vent comes apart very nicely with several tabs. However the inside of the vent will need to be opened up for a 52mm gauge to seat flush. (I used a 2" hole saw in reverse) I just ran the drill inside the mount I printed as a guide. Very little needs to be removed. Modify as you need, please give me credit for the original design. Thank You
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed