Headrest Holder
2019 Suzuki Jimny JB64
May 9, 2026
Use the built-in measurement tool to verify fit before downloading or ordering.
Description
I placed it diagonally on print table. Aslo you will need 2 hex screws for each holder to mount (I used 6x20, but you can test with shorter one M6). Nd it would be nice to protect cabin plastic with some soft material where metal guids of headrest ends line on one of the photos.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Loading pricing...
Use the built-in measurement tool to verify fit before downloading or ordering.
Part Description
I placed it diagonally on print table. Aslo you will need 2 hex screws for each holder to mount (I used 6x20, but you can test with shorter one M6). Nd it would be nice to protect cabin plastic with some soft material where metal guids of headrest ends line on one of the photos.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed