Trunk Grocery Bag Hook
2019 Tesla Model 3
Description
On the Tesla Model 3 there is a bolt that sticks out from the top of the trunk area. This hook is designed to accept a M6 Nut and gets attached to that protruding bolt. I kept the hook fairly short so it would not get in the way when hauling larger items. Upon request I've added a second version which does not require a bolt, the centre hole is smaller and deeper so that it can self tap onto the protruding bolt. This version does not require support to print Please let me know in the comments section how this thing works out or if you'd like to suggest modifications. Sept. 2019 I added an updated M6 nut version. It's just an aesthetic update, this one is not so boxy.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
On the Tesla Model 3 there is a bolt that sticks out from the top of the trunk area. This hook is designed to accept a M6 Nut and gets attached to that protruding bolt. I kept the hook fairly short so it would not get in the way when hauling larger items. Upon request I've added a second version which does not require a bolt, the centre hole is smaller and deeper so that it can self tap onto the protruding bolt. This version does not require support to print Please let me know in the comments section how this thing works out or if you'd like to suggest modifications. Sept. 2019 I added an updated M6 nut version. It's just an aesthetic update, this one is not so boxy.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed