Cup Holder Insert
2019-2025 Toyota Rav4
Description
I found that the dual cupholder in my Rav4 is a little loose for my Dopper water bottle. So I tried 3d designing for the first time, to solve my problem. Turned out pretty decent! The asymmetrical and conical cup holder was not an easy starting point, but we managed it! The model was created in Fusion 360 after some reference photo's. I printed the model in black PETG with my Elegoo Centauri Carbon. Easy print with 15% infill, without support. Make sure you flip it, or auto-orient in your slicer.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
I found that the dual cupholder in my Rav4 is a little loose for my Dopper water bottle. So I tried 3d designing for the first time, to solve my problem. Turned out pretty decent! The asymmetrical and conical cup holder was not an easy starting point, but we managed it! The model was created in Fusion 360 after some reference photo's. I printed the model in black PETG with my Elegoo Centauri Carbon. Easy print with 15% infill, without support. Make sure you flip it, or auto-orient in your slicer.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed