Cup Holder Shim
2020-2023 Subaru Outback
Description
The Legacy / Outback typically comes with one cupholder shim and you might want a second one. This is pretty inexpensive from Subaru directly (part #92076AN00A), but you might want to print one because its more convenient or you want to customize it with a design or color. I printed one from TPU, so that it would be similar to the original. FreeCad file attached so you can customize.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
The Legacy / Outback typically comes with one cupholder shim and you might want a second one. This is pretty inexpensive from Subaru directly (part #92076AN00A), but you might want to print one because its more convenient or you want to customize it with a design or color. I printed one from TPU, so that it would be similar to the original. FreeCad file attached so you can customize.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed