Console Organizer
2020 Toyota Rav4
Description
V3: had to taper 10mm on the bottom and compensated sunglass holder by angling inboard by 10mm. *Tested perfect. added 3mm felt to protect glasses and other items forward of the organizer. V2: V1 was 2 mm too wide. Trimmed the sides down on both the inlet slot and contact overhangs. Lowered the top wall so it's easier to reach coins. Also, added more fillets, because, who doesn't like fillets? 2020 RAV4 center console organizer. Designed to compliment the standard tray. Drops in forward of standard tray and leaves enough room in the front for cell phone or other flat objects (i.e. id badge, etc.) Coins are designed for US and Japanese yen.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
V3: had to taper 10mm on the bottom and compensated sunglass holder by angling inboard by 10mm. *Tested perfect. added 3mm felt to protect glasses and other items forward of the organizer. V2: V1 was 2 mm too wide. Trimmed the sides down on both the inlet slot and contact overhangs. Lowered the top wall so it's easier to reach coins. Also, added more fillets, because, who doesn't like fillets? 2020 RAV4 center console organizer. Designed to compliment the standard tray. Drops in forward of standard tray and leaves enough room in the front for cell phone or other flat objects (i.e. id badge, etc.) Coins are designed for US and Japanese yen.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed