Center Console Tray
2020 Tesla Model 3
Description
Much credit to jonco223 for his original. I added ridges to the bottom to make it easier to pick things up, a brim to support it at the back edges so it's not just friction-fit, and finger grooves in the form of a Model 3 logo to help lift it out. You'll also see in the finished object photos that I flocked it for a velvety surface. There's some technique involved, and I wasn't perfectly successful, but further attempts should be better. Hatchbox PLA on a modified Printrbot Simple Metal; black flocking glue and navy flocking powder by Donjer.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
Much credit to jonco223 for his original. I added ridges to the bottom to make it easier to pick things up, a brim to support it at the back edges so it's not just friction-fit, and finger grooves in the form of a Model 3 logo to help lift it out. You'll also see in the finished object photos that I flocked it for a velvety surface. There's some technique involved, and I wasn't perfectly successful, but further attempts should be better. Hatchbox PLA on a modified Printrbot Simple Metal; black flocking glue and navy flocking powder by Donjer.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed