Subwoofer Block Off Plate
2021 Ford F-150 (B&O Unleashed)
Description
Created this for my 2021 F-150 to block off the hole in the back wall of the truck when removing the B&O Unleashed subwoofer to install an aftermarket setup. I placed the block off in place and then drilled small pilot holes and then use self tapping screws to secure in place. I also used 1/16" foam to help seal the block off to the truck. Fitment is almost perfect side to side and a little wiggle room top to bottom but should not be an issue. Printed with Sunlu PETG at 15% infill and 3 walls
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
Created this for my 2021 F-150 to block off the hole in the back wall of the truck when removing the B&O Unleashed subwoofer to install an aftermarket setup. I placed the block off in place and then drilled small pilot holes and then use self tapping screws to secure in place. I also used 1/16" foam to help seal the block off to the truck. Fitment is almost perfect side to side and a little wiggle room top to bottom but should not be an issue. Printed with Sunlu PETG at 15% infill and 3 walls
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed