J1772 Adapter Trunk Holder
2022 Tesla Model Y
Description
**Please note I am not responsible if this print scratches the interior of your car** Remodeled to fit my 2022 Model Y. May fit other models that have a rectangular 45mm opening for the manual cable release but I don't have another car to test it on. Printed in PETG May need a hair dryer to be able to bend the taps past the car's plastic without cracking the print. At least this was the method that I used. Has been installed for over a year and has yet to fall off
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
**Please note I am not responsible if this print scratches the interior of your car** Remodeled to fit my 2022 Model Y. May fit other models that have a rectangular 45mm opening for the manual cable release but I don't have another car to test it on. Printed in PETG May need a hair dryer to be able to bend the taps past the car's plastic without cracking the print. At least this was the method that I used. Has been installed for over a year and has yet to fall off
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed