Cargo Ceiling Hook Base Plate Adapter
2022 Land Rover Defender
Description
Add some proper ceiling hooks in your Defender! 3D printed base plate adapter allows the use of tie down anchors from Gmc/Chevy (Sierra, Silverado, Colorado) pickups. requires : - to remove the cover plate from ceiling (see photo - careful with plastic pins), - 3D print the above plate/adapter, - 2x GMC/Chevy tie down - 2x 3/8inx1.5in carriage bolt + washer + nut (note - I used some Perma Blue to cold bluing the steel bolt) I use the hook to add a cheap pet barrier/cargo divider with a jeep JK/JL cover
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
Add some proper ceiling hooks in your Defender! 3D printed base plate adapter allows the use of tie down anchors from Gmc/Chevy (Sierra, Silverado, Colorado) pickups. requires : - to remove the cover plate from ceiling (see photo - careful with plastic pins), - 3D print the above plate/adapter, - 2x GMC/Chevy tie down - 2x 3/8inx1.5in carriage bolt + washer + nut (note - I used some Perma Blue to cold bluing the steel bolt) I use the hook to add a cheap pet barrier/cargo divider with a jeep JK/JL cover
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed