Tow Hitch Cover
2024 Tesla Model 3 Highland
Description
<h4>Summary</h4> This is a remix from the **taiwantoni** (thanks for his work) design for the Tesla Model 3 Highland. https://www.thingiverse.com/thing:4284385 Following is his own description: When fitting the tow hitch in the Model 3, you have to remove the cover which leaves a big hole for lots of dirt to get in. This cover only spares the tow hitch itself and the plug for the electrical connection. Since the cover would be to big for my 3D printer, I made 2 halfs and a connector. This Highland design: Please notice that I have reused the 2 screws from the genuine Tesla cover (the one from **taiwantoni** does not fit). <h4>Disclaimer</h4> I do not take responsibility for this part, please use at your own risk. <h4>Print Settings</h4> Rafts: No Supports: Yes Resolution: 0.2 Infill: 20% Filament material: PLA
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
<h4>Summary</h4> This is a remix from the **taiwantoni** (thanks for his work) design for the Tesla Model 3 Highland. https://www.thingiverse.com/thing:4284385 Following is his own description: When fitting the tow hitch in the Model 3, you have to remove the cover which leaves a big hole for lots of dirt to get in. This cover only spares the tow hitch itself and the plug for the electrical connection. Since the cover would be to big for my 3D printer, I made 2 halfs and a connector. This Highland design: Please notice that I have reused the 2 screws from the genuine Tesla cover (the one from **taiwantoni** does not fit). <h4>Disclaimer</h4> I do not take responsibility for this part, please use at your own risk. <h4>Print Settings</h4> Rafts: No Supports: Yes Resolution: 0.2 Infill: 20% Filament material: PLA
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed