Glove Box Gap Spacer
2024 Toyota Tacoma
Description
The 2024 Tacoma has a 1/4 inch gap at the top of the glove box when closed. If you own a 2024 Tacoma, you'll know what I'm talking about. This spacer will fix it so the closed door doesn't look like a manufacturer defect. You'll need to print two of these, one for each side of the box. You'll notice that the part isn't symmetrical. Install it with the wide side toward the rear of the truck. I installed mine using double-sided tape. Easy peasy. Be sure to print it with the infill set to 100%.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
The 2024 Tacoma has a 1/4 inch gap at the top of the glove box when closed. If you own a 2024 Tacoma, you'll know what I'm talking about. This spacer will fix it so the closed door doesn't look like a manufacturer defect. You'll need to print two of these, one for each side of the box. You'll notice that the part isn't symmetrical. Install it with the wide side toward the rear of the truck. I installed mine using double-sided tape. Easy peasy. Be sure to print it with the infill set to 100%.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed