Sunglass Holder
2025 Toyota Land Cruiser 250 J250
Description
Sunglass holder for the 2025 Toyota Land Cruiser (Land Cruiser 250). I expect it should work with 2024- but I have a 2025 so I only tested on that. It's meant to be glued above the rear mirror as shown in the images. I used Sugru as the adhesive because of I live somewhere very hot, but other adhesives should work as well if you prefer. I also glued in a bit of foam as padding to keep it quieter. I printed this out of PETG-CF. I use STP files, but I ran them through an online converted to make them into STLs so if there's any problems with the STLs please let me know.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed
Part Description
Sunglass holder for the 2025 Toyota Land Cruiser (Land Cruiser 250). I expect it should work with 2024- but I have a 2025 so I only tested on that. It's meant to be glued above the rear mirror as shown in the images. I used Sugru as the adhesive because of I live somewhere very hot, but other adhesives should work as well if you prefer. I also glued in a bit of foam as padding to keep it quieter. I printed this out of PETG-CF. I use STP files, but I ran them through an online converted to make them into STLs so if there's any problems with the STLs please let me know.
Print Instructions
Standard FDM printing settings: - Layer height: 0.2mm - Infill: 70% - Supports: As needed